Other Product

Welded Gabion Mesh consists of rigid wire mesh baskets manufactured by electrically welding steel wires at each intersection. This construction creates a strong, dimensionally stable structure with clean lines and high load-bearing capacity. Made from low-carbon steel or stainless steel, welded gabions are widely applied in structural support, landscape architecture, protective systems, and erosion control projects where strength and precise shape are required.

Gabion Sizes

Welded gabion baskets are supplied in a wide range of standard dimensions to suit different regional and project requirements.

• 1.0 × 1.0 × 1.0 m

• 1.5 × 0.5 × 0.5 m

• 2.0 × 1.0 × 1.0 m

• 0.5 × 0.5 × 0.5 m (commonly used in Israel)

• 3′ × 3′ × 6′ and 3′ × 3′ × 4′ (North American standards)

Custom sizes can be produced upon request.

Mesh Opening and Wire Diameter

• Mesh Shape: Square or rectangular

• Standard Mesh Openings: 50 × 50 mm, 75 × 75 mm, 100 × 100 mm

• Wire Diameters: 3.0 mm, 4.0 mm, 5.0 mm, 6.0 mm

• Tensile Strength: Up to 770 N/mm²

This combination ensures excellent rigidity, uniform load distribution, and long-term structural stability.

Surface Coating Options

To enhance corrosion resistance and extend service life, welded gabion mesh is available with multiple surface treatments:

• Hot-dip galvanizing

• Electro-galvanizing

• Galfan coating (95% zinc, 5% aluminum)

• PVC or polyester coating in green, grey, or black

These coatings allow the gabions to perform reliably in outdoor, coastal, and industrial environments.

Materials

• Hot-dip galvanized low-carbon steel wire

• Galfan alloy-coated steel wire

• Stainless steel wire (Grade 304 or 316)

• Alu-zinc alloy coated steel wire

Material selection can be adjusted according to structural demands and environmental conditions.

Applications

• Retaining wall systems for soil stabilization

• Building facades and architectural cladding

• Noise barriers and highway protection walls

• Riverbank reinforcement and flood erosion control

• Military defense structures and perimeter security

• Decorative garden walls, partitions, and planters

• Modular fencing filled with stone or sand

Standards and Compliance

Welded Gabion Mesh is manufactured in accordance with international standards:

• EN 10218 / EN 10223 / EN 10244 / EN 10245

• ASTM A185 / A641 / A975

Products can be supplied with CE certification and optional geotextile liners when required by the project.

Packing

Welded gabion panels are delivered flat-packed to minimize transport volume. Each set includes spiral binders, clips, or lacing wires for efficient on-site assembly. Optional accessories such as geotextile liners, internal diaphragms, and pre-installed stiffeners are available to enhance structural performance during stone filling.